AC Current 2 Click
AC Current 2 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.
Click Library
- Author : Stefan Filipovic
- Date : Feb 2025.
- Type : ADC/I2C type
Software Support
Example Description
This example demonstrates how to use the AC Current 2 Click board for reading the measurements from the AC Current sensor attached to the Click board input.
Example Libraries
- MikroSDK.Board
- MikroSDK.Log
- Click.ACCurrent2
Example Key Functions
- accurrent2_cfg_setup This function initializes Click configuration structure to initial values.
void accurrent2_cfg_setup(accurrent2_cfg_t *cfg)
AC Current 2 configuration object setup function.
AC Current 2 Click configuration object.
Definition accurrent2.h:159
- accurrent2_init This function initializes all necessary pins and peripherals used for this Click board.
err_t accurrent2_init(accurrent2_t *ctx, accurrent2_cfg_t *cfg)
AC Current 2 initialization function.
AC Current 2 Click context object.
Definition accurrent2.h:144
- accurrent2_read_current This function reads the current measurement from the AC Current sensor (30A/1V).
err_t accurrent2_read_current(accurrent2_t *ctx, float *current)
AC Current 2 read current function.
Application Init
Initializes the driver and logger.
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, " Application Init " );
if ( ( ADC_ERROR == init_flag ) || ( I2C_MASTER_ERROR == init_flag ) )
{
log_error( &logger, " Communication init." );
for ( ; ; );
}
log_info( &logger, " Application Task " );
}
#define ACCURRENT2_MAP_MIKROBUS(cfg, mikrobus)
MikroBUS pin mapping.
Definition accurrent2.h:120
void application_init(void)
Definition main.c:36
#define MIKROBUS_POSITION_ACCURRENT2
Definition main.c:30
Application Task
Continuously reads the AC current value and logs the measured data in amperes (A).
{
float current = 0;
{
log_printf( &logger, " AC Current : %.3f A\r\n\n", current );
Delay_ms ( 1000 );
}
}
@ ACCURRENT2_OK
Definition accurrent2.h:180
void application_task(void)
Definition main.c:67
Note
The AC Current sensor [MIKROE-2524] required for this Click board should have a specification of 30A/1A.
Application Output
This Click board can be interfaced and monitored in two ways:
- Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
- UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.
Additional Notes and Information
The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.